How to Make Emergency Water Filters

Surviving A Water Crisis

Water problem solved: Learn how to build a ceramic and carbon water filter for only $25 in parts, capable of filtering 10 – 15 gallons of water per day to produce clean drinking water. Simple water filter systems used in third world countries and disaster relief.

Are you prepared for a serious water crisis in the days or months ahead?

Producing clean drinking water is the solution to a water crisis. Why? Because contaminated water is dangerous to humans; it sickens populations and many people can die a miserable death from a water born pathogen or poison, that they could have otherwise filtered out, if they had knowledge before hand.

What Is Going On?

There is a feeling in the country that things are changing for the worse; the government is deep in debt, politicians are just looking out for themselves, and society as a whole is beginning to fray. For a variety of reasons it appears that the good old days are winding down and harder times are coming. A lot of folks look at our high-tech lifestyles and realize that if critical functions were removed they would be utterly helpless to fend for themselves. Living without the internet seems unimaginable to many; just think if they lost electricity, or grocery stores, or running water…

Being Prepared For A Crisis

As the bad news continues to come in there are a lot of folks preparing for a life without some or all of our modern conveniences. There’s a variety of books, blogs, and TV shows discussing how this might be possible. Of course there are many unknowns when planning for disaster, such as what happens, how long it lasts, your living situation, location, and financial circumstances. One thing that you will always need, no matter what happens, is access to clean water. Even a disaster that only lasts for a few days could become deadly if it leaves you without water.

DIY Emergency Water Filters

This article introduces ceramic water filter cartridges, which provide a low-cost, low-tech, well proven solution that enables clean water to be produced from just about any fresh water source.

What Is A Ceramic Water Filter?

ceramic-water-filter

The filter consists of a ceramic shell which usually contains activated carbon (we have an article about how to make activated charcoal/carbon if you’re interested). The ceramic shell has sub-micron sized pores which filter out small contaminants such as bacteria and particulates while the carbon inside treats the water by removing a wide spectrum of chemicals. Specialized filters that remove particular chemicals such as fluoride or arsenic can also be manufactured by using other media in place of the carbon.

Low Cost Water Filtration Used In Third World Countries And Disaster Recovery

These filters are fairly low cost but are often bundled with fancy containers and big brand names that can add hundreds of dollars to the price. In reality though, you can make your own water filter systems at a much lower cost. This has been proven by missionary groups and NGOs in disaster situations all around the world.

Two pictures are presented below (in lieu of a few more pages of text) to explain how these systems can be made and used. The picture on the left is made from a couple of 5 gallon buckets with the filter in the middle. Though you can use any type of containers when building your system, the basic design is almost always the same: A top container holding the unfiltered water and the filter, and a bottom container to catch the clean water that drips from the filter spout. The picture on the right shows the parts that make up an ’emergency kit’ which is used to create the system at left. Currently this kit sells for only $25.

emergency-water-filters
water-filter-kit

These systems are portable, require no power, are very simple to create and maintain, and are low cost.

They can be used with just about any freshwater source as has been proven throughout the world for the last couple of decades by a multitude of refugees.

How Much Water And How Fast?

One of the first questions most people have is “How much water are these filters good for?” There are two answers for this question. The filter will remove bacteria and particulates for as long as the ceramic shell is intact. The pores in the ceramic can get clogged over time, but it is easy to unclog them by using a slight abrasive to remove the outermost (clogged) layer of shell.

Chemicals are treated by the activated carbon inside which is used up after 6 to 8 months of ‘normal’ use. ‘Normal’ assumes 12 to 15 gallons per day from a natural water source. This implies the carbon will last for 3000 to 4000 gallons. The carbon’s lifespan will be shortened if the water contains a lot of chemicals, such as chlorine. The filters can be stored indefinitely and used intermittently provided they are dried out well inbetween uses.

A 5 Gallon Bucket Can Produce 12 To 15 Gallons Per Day

The amount of clean water a system can produce in a day is another question most people have. The water flow of a filter dripping out of the spout depends on the water level in the upper container, so as the water level decreases the flow rate slows. For a standard 5 gallon bucket the flow rate is 12 to 15 gallons per day assuming the bucket is refilled a few times. This is plenty of water for drinking and basic needs for a family. However, one can easily increase the flow rates if larger groups or bartering applications are needed.

three-dome-filters

A very simple method to increase flow rates is to place filters in parallel. For example; if one filter is giving a flow of 1/2 gallon per hour, placing a second filter in the container will double the flow rate. (A standard 5 gallon bucket can fit up to three dome filters). Another advantage of parallel filters is there is more activated carbon so you can remove more chemicals. The downside to this method is that it costs more to implement.

Increase Water Flow By Increasing The Pressure On The Filter

A second method for increasing water flow is to increase the pressure on the filter. This can be accomplished by using deep upper containers to provide more water pressure, or by increasing the air pressure in the container using an air tight seal and a hand pump. The downside of air pressure is that it increases system costs and also requires manual labor.

Add A Siphon Tube To Produce A “Pulling Force”

stacked-bucket-system-water-filter

A third method that is low cost is to add a siphon tube to the output of the filter. This provides a pulling force instead of a pushing one.

(This is the same mechanism used for siphoning gas)

The force is proportional to the length of the siphon and the vertical distance it is from one end to the other; the longer the tube the faster the water flows.

For a stacked bucket system (where one bucket sits directly on top of the other one, and the vertical distance is only a foot or so) the siphon can double the flow compared to a filter just dripping.

A ‘separated bucket’ system (shown to the right) uses a long siphon; this can increase flow rates a lot more depending on the siphon height. Please note that if you separate the buckets like this, the bottom one should stay covered to prevent other contaminants from getting into the filtered water. This method is probably the best due to its low cost and low effort required.

Word Of Caution On Flow Rate

There is a caveat to increasing flow rates and that is that it decreases the ‘contact time’ that the water has with the activated carbon and thus reduces the ability of the carbon to adsorb some chemicals. The time needed varies with the type of chemical being adsorbed so unfortunately there is no straightforward answer as to how fast you should go. The best advice is to filter the water however quickly you have a demand for it.

These Water Filters Can Be Used In Many Applications

These filters are adaptable to many applications and configurations. They are used in rain water systems, well water remediation, and back country living as well as disaster situations. Besides tens of thousands of refugees, farmers in Uganda, apartment dwellers in NYC, and water vendors in Central America have all used these filters successfully.

One additional benefit of these filters is their potential value as barter items if times do get really bad. Something fairly inexpensive now could be worth a whole lot more later on, especially if they’re useful.

Ceramic And Carbon Water Filters Are Excellent Devices For Families And Small Groups

Ceramic and carbon water filters are low cost, do not require electricity to operate, and are simple to assemble and maintain.

They work on both biological and chemical contaminants in water sources where many other filter types only work on one or the other.

In Do It Yourself applications they provide an outstanding value and allow for a wide degree of customization. They can also provide a form of investment as they would enable bartering for other valuable goods and services in ‘grid down’ scenarios.

Homespun Environmental is a small business catering to the DIY ‘prepper’ market for ceramic water filters. DIY (Doing it yourself) allows for much lower prices and simple water filter systems that can be customized to particular circumstances and needs. They offer individual components, affordable, emergency water filter kits, and systems for the outdoor sportsman.

READING ARTICLES IS NOT ENOUGH. YOU ABSOLUTELY NEED THIS BOOK TO UNDERSTAND WHAT IS HAPPENING IS YOU ARE TO SURVIVE WHAT IS COMING.

Leave a Comment

Your email address will not be published. Required fields are marked *